Onsite Water Storage

This article was written by Bushmans Tanks. You may view the original article (‘Onsite Water Storage Made Easy‘), water tanks, or industrial tanks.

Government agencies at the local and state level are requiring residential and commercial buildings to have a water storage tank installed. Choice of water tank is crucial.
Water storage tanks are now required to be installed by local councils with the construction of new dwellings and commercial buildings and for the renovation of existing buildings. The majority of these tanks are being installed by the building and plumbing industry. It is important to ensure the correct tank installed for your application.
This requirement for tanks is driven by government authorities requiring the storage of water that falls on site and this water storage maybe permanent or temporally so storm water runoff can be slowed.

How to select a Tank

Factors that must be considered when selecting a water storage tank include roof area, hard surfaces (paths, driveways), annual rainfall figures and the intensity of falling rain during a storm. Additionally the way in which the water is to be used is important. These factors will determine the size, location and type of tank required. In older buildings, multiple tanks me be required due to storm water exiting the site from more than one location. In areas where there are few but more intense rain periods there will be a requirement for a larger storage capacity.
Special fittings may be required for commercial and industrial buildings – these can be added to suit the application. If there will be oil grease and chemcials in the runoff water, you may need a water treatment system before the water is released into the main storage tank.
Bushmans can help you through this process to ensure the right product is selected.

Storage Tank Accessories and Fittings

To ensure the best use of a tank there is a need to ensure the right fittings and accessories are included in the installation. Fittings and accessories such as first flush units, leaf diverters and specialised outlet and inlets may be needed. Pumps are often included with the tank, however an automatic change over device such as the Biano Rainsaver may be required. The tank, pump and accessories can be supplied as a package to make the installation of the system simpler and faster.

Bushman Tanks

Bushman Tanks have been manufacturing tanks since 1989 and have the experience and expertise in commercial and industrial applications which will ensure that the tank is of the highest quality and is suited to the application. Bushmans have the logistical experience to ensure it arrives on site on time and in good condition.